Audio Technica Cardioid Condenser Microphone AT4021

Audio Technica Cardioid Condenser Microphone AT4021 AUDIO SYSTEM

Specification
    • Outstanding performance and rugged construction
    • High SPL handling and wide dynamic range
    • Flat, extended frequency response
    • Switchable 80 Hz hi-pass filter and 10 dB pad
    • High front-to-back rejection ratio—cardioid polar pattern improves isolation of desired sound source
    • Low self noise perfectly suited for digital recording equipment
    • Exceptional reproduction of low frequency sounds
    • Low-mass element for superb transient response
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 146 dB SPL, 1 kHz at 1% T.H.D.;
156 dB SPL, with 10 dB pad (nominal)
NOISE 14 dB SPL
DYNAMIC RANGE (typical) 132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 3.0 mA typical
SWITCHES Flat, roll-off; 10 dB pad
WEIGHT 119 g (4.2 oz)
DIMENSIONS 144.0 mm (5.67″) long,
21.0 mm (0.83″) maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8″-27 threaded stands; windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE S1
POLAR PATTERN FREQUENCY RESPONSE
POLAR PATTERN FREQUENCY RESPONSE