Audio Technica Cardioid Condenser Microphone AT4041

Audio Technica Cardioid Condenser Microphone AT4041 AUDIO SYSTEM

Specification
    • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
    • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
    • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
    • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
    • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
    • Switchable hi-pass filter and rugged turned-brass microphone housing
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 121 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
SWITCH Flat, roll-off
WEIGHT 4.2 oz (120 g)
DIMENSIONS 6.28″ (159.5 mm) long,
0.83″ (21.0 mm) body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8″-27 threaded stands; AT8159 windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE S1

 

POLAR PATTERN FREQUENCY RESPONSE
POLAR PATTERN FREQUENCY RESPONSE