Audio Technica Stereo Shotgun Microphone BP4027

Audio Technica  Stereo Shotgun Microphone BP4027 AUDIO SYSTEM

    • Designed for broadcasters, videographers and sound recordists
    • Compact, lightweight design is perfect for camera-mount use
    • Independent Line-cardioid and Figure-of-eight condenser elements
    • Switchable low-frequency roll-off
    • Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes
    • Includes a 0.61 m (24") cable (5-pin XLRF to two standard 3-pin XLRM connectors)
    • RoHS compliant—free from all substances specified in the EU directive on hazardous substances
ELEMENTS Fixed-charge back plate, permanently polarized condenser
POLAR PATTERNS Line-cardioid,
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY Mid: -30 dB (31.6 mV) re 1V at 1 Pa;
Side: -34 dB (19.9 mV) re 1V at 1 Pa;
LR Stereo: -36 dB (15.8 mV) re 1V at 1 Pa
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL Mid: 123 dB SPL, 1 kHz at 1% T.H.D.;
Side: 127 dB SPL, 1 kHz at 1% T.H.D.;
LR Stereo: 126 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) Mid: 101 dB, 1 kHz at Max SPL;
Side: 101 dB, 1 kHz at Max SPL;
LR Stereo: 102 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO Mid: 72 dB SPL, 1 kHz at 1 Pa;
Side: 68 dB SPL, 1 kHz at 1 Pa;
LR Stereo: 70 dB SPL, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical at 48V, each channel
SWITCHES M-S, LR Stereo-Wide (LR-W), LR Stereo-Narrow (LR-N);
Flat, roll-off
WEIGHT 142 g (5.0 oz)
DIMENSIONS 380.0 mm (14.96") long,
21.0 mm (0.83") diameter
CABLE Dual 0.61 m (24") shielded two-conductor, terminated in two XLR3M-type connectors
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8135 foam windscreen; 5/8"-27 to 3/8"-16 threaded adapter; protective carrying case