Audio Technica Stereo/Mono Microphone AT8024

Audio Technica Stereo/Mono Camera-Mount Microphone AT8024 AUDIO SYSTEM

Specification
    • Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone
    • Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
    • Handles loud sound sources without distortion
    • Three-position adjustable attenuator and switchable low-frequency roll-off
    • Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
    • Compact, lightweight design with integral shoe mount
    • Red/green LED power indicator
    • Includes windscreen, fuzzy windscreen and AA battery
ELEMENTS Fixed-charge back plate,
permanently polarized condenser
POLAR PATTERNS Line-cardioid, LR stereo
FREQUENCY RESPONSE 40-15,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY –37 dB (14.1 mV) re 1V at 1 Pa (Mono & LR Stereo)
IMPEDANCE 50 ohms
MAXIMUM INPUT SOUND LEVEL 128 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) Mono: 106 dB, 1 kHz at Max SPL;
Stereo: 104 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO Mono: 72 dB, 1 kHz at 1 Pa;
Stereo: 70 dB, 1 kHz at 1 Pa
BATTERY TYPE Type: One 1.5V AA (included);
Life: 80 hours, typical
SWITCHES Mono, M-S Stereo;
Three-position attenuator;
Flat, roll-off
WEIGHT 114 g (4.0 oz)
DIMENSIONS 172.0 mm (6.77″) long,
24.0 mm (0.94″) maximum body diameter
OUTPUT CONNECTOR 3.5 mm stereo mini-plug on cable
CABLE Permanently attached 0.2 m -1 m (7.8″- 39.3″) coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
ACCESSORIES FURNISHED Windscreen; fuzzy windscreen; AA battery
AUDIO-TECHNICA CASE STYLE CM1