Audio Technica Cardioid Microphone ATND971

Audio Technica Cardioid Condenser Boundary Microphone with Dante™ Network Output ATND971 AUDIO SYSTEM
Specification
    • A digital Ethernet mic with Dante capabilities – an Audio-Technica innovation
    • Connects directly to network via Ethernet cable – no need for expensive audio cable or soldering
    • Integrated switch allows mic to communicate with – and control – other Dante-enabled devices within a network
    • Local or remote control of mic gain, low-cut filter and LED indicator
    • Red/Green LED indicator
    • UniGuard® RFI-shielding technology; UniSteep® filter
    • Powered by network PoE
    • Scalable across Dante’s 512 bidirectional audio channels
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
MAXIMUM INPUT SOUND LEVEL 117 dB SPL, 1 kHz at 1% T.H.D.
SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
POWER REQUIREMENTS PoE IEEE802.3af standard (Power consumption 1.5W)
SWITCHES Local Mode: Touch-sensitive capacitivetype user switch function: toggle (mute
on power up), toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB
Remote Mode: Low-cut and Gain via third-party software*
WEIGHT (MICROPHONE) 393 g (13.8 oz)
DIMENSIONS 110.0 mm (4.33″) maximum length,
89.5 mm (3.52″) maximum width,
35.8 mm (1.41″) maximum height
OUTPUT CONNECTOR RJ45
OPTIONAL INTERCHANGEABLE ELEMENTS UE-O omnidirectional (360°)
UE-H hypercardioid (100°)
ACCESSORY FURNISHED Soft protective pouch
POLAR PATTERN FREQUENCY RESPONSE
POLAR PATTERN
FREQUENCY RESPONSE