Audio Technica Cardioid Microphone AE3000

Audio Technica Cardioid Condenser Instrument Microphone AE3000 AUDIO SYSTEM
Specification
    • Excels in high-SPL applications
    • Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound
    • Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source
    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
    • Robust design for enduring dependability on the road
    • Integral 80 Hz HPF switch and 10 dB pad
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -43 dB (7.0 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal)
NOISE 11 dB SPL
DYNAMIC RANGE (typical) 137 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 83 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
SWITCHES High-pass filter;
10 dB pad (nominal)
WEIGHT 6.0 oz (170 g)
DIMENSIONS 4.55″ (115.5 mm) long,
1.89″ (48.0 mm) maximum diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8471 isolation clamp for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLE R6
POLAR PATTERN FREQUENCY RESPONSE
POLAR PATTERN
FREQUENCY RESPONSE