Crown Power Amplifier I-Tech HD Series


I-Tech 4x3500HD

Four-channel, 4000W @ 4Ω Power Amplifier

Channels 4 inputs, 4 outputs (Analog, AES 3, VDrive, CobraNet)
Sensitivity Adjustable in 0.1dB increments from 1.28Vrms to 8Vrms
Damping Factor > 5000
Signal to Noise Ratio ≥ 108dB
THD (full rated power, 20 Hz – 20 kHz) 0.35%
Frequency Response ± 0.25dB
Intermodulation Distortion (from 0 dB down to -40 dB) 0.06%
Crosstalk > 80dB
Common Mode Rejection > 80dB typical
Dimensions 3.3″ x 19″ x 16.95″ (8.9 cm x 48.3 cm x 43.1 cm)
Net Weight 29 lbs (13.2 kgs)
Power Connector 32A powerCON (on amp) – L6-30 plug (into wall)

 

I-Tech 9000HD

Two-channel, 3500W @ 4Ω Power Amplifier

Channels 2
Sensitivity 1.4Vrms to 7.75Vrms
Signal to Noise Ratio > 112dB
THD < 0.1%
Intermodulation Distortion < 0.2%
Frequency Response ± 0.25dB
Crosstalk > 80dB
Common Mode Rejection > 70dB typical
Dimensions 19″ x 16.2″ x 3.5″ (48.3 cm x 41.1 cm x 8.9 cm)
Net Weight 28 lbs (12.7 kgs)
Shipping Weight 36 lbs (16.3 kgs)
IEC Power Connector 20A

 

I-Tech 5000HD

Two-channel, 2500W @ 4Ω Power Amplifier

Channels 2
Sensitivity 1.4Vrms to 7.75Vrms
Signal to Noise Ratio > 112dB
THD < 0.1%
Intermodulation Distortion < 0.2%
Frequency Response ± 0.25dB
Crosstalk > 80dB
Common Mode Rejection > 70dB typical
Dimensions 19″ x 16.2″ x 3.5″ (48.3 cm x 41.1 cm x 8.9 cm)
Net Weight 28 lbs (12.7 kgs)
Shipping Weight 36 lbs (16.3 kgs)
IEC Power Connector 20A