XLC 2500
Two-channel, 500W @ 4Ω Power Amplifier
| AC Line Voltage and Frequency Configurations Available | (+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz |
| Voltage Gain | 35 |
| Sensitivity | 1.4V (for full rated power at 4 ohms) |
| Signal to Noise Ratio | (ref. rated power, 8 ohms, 1 kHz) > 103 dB |
| THD | <0.5% |
| Damping Factor | (8 ohms, 10 Hz to 400 Hz) >200 |
| Intermodulation Distortion | (from full rated output to -30 dB) <0.3% |
| Frequency Response (at 1W, 20 Hz – 20 kHz) | 0 dB |
| Crosstalk | >85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz) |
| Input Impedance (nominal) | 20 kilohms balanced, 10 kilohms unbalanced |
| Load Impedance | 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge |
| Dimensions | 19″ x 3.5″ x 8″ (48.3cm x 8.9cm x 20.6cm) |
| Weight | 8.3 lbs (3.75 kg) |
| Shipping Weight | 10.7 lbs (4.85 kg) |
| IEC Power Connector | 15A |
XLC 2800
Two-channel, 800W @ 4Ω Power Amplifier
| AC Line Voltage and Frequency Configurations Available | (+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz |
| Voltage Gain | 42 |
| Sensitivity | 1.4V (for full rated power at 4 ohms) |
| Signal to Noise Ratio | (ref. rated power, 8 ohms, 1 kHz) > 103 dB |
| THD | <0.5% |
| Damping Factor | (8 ohms, 10 Hz to 400 Hz) >200 |
| Intermodulation Distortion | (from full rated output to -30 dB) <0.3% |
| Frequency Response (at 1W, 20 Hz – 20 kHz) | -1 dB |
| Crosstalk | >85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz) |
| Input Impedance (nominal) | 20 kilohms balanced, 10 kilohms unbalanced |
| Load Impedance | 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge |
| Dimensions | 19″ x 3.5″ x 10.4″ (48.3cm x 8.9cm x 26.4cm) |
| Weight | 10.4 lbs (4.72 kg) |
| Shipping Weight | 13.2 lbs (6 kg) |
| IEC Power Connector | 15A |
CXM 2000
Cinema Monitor and Crossover System
| AC Line Voltage and Frequency Configurations Available | (+/- 10%) 100~120V / 220~240V 50/60 Hz, 50W |
| Processor Input Channels | 8 inputs |
| Input Impedance | (Processor inputs) > 10 kΩ; (Power amplifier inputs) >10 kΩ |
| Signal to Noise Ratio | 104 dB (A-Weighted) |
| Crosstalk | >85 dB (A-Weighted) |
| Internal Monitor Speaker Power | 8W |
| DSP Section | DSP for left, right and center channel speakers |
| Dimensions | 19″ x 3.5″ x 8″ (48.3cm x 8.9cm x 20.6cm) |
| Weight | 8.3 lbs (3.75 kg) |
| Shipping Weight | 10.7 lbs (4.85 kg) |
| IEC Power Connector | 15A |