JBL Speaker Control 28-1

JBL Speaker Control 28-1 AUDIO SYSTEMS

JBL Control XT Wireless XTGPHAS Powerful, expandable wireless stereo Bluetooth® speakers for home or on-the go

JBL Control X Wireless

Detailshttp://www.jbl.com/home-speakers/CONTROL+X+WIRELESS.html?dwvar_CONTROL%20X%20WIRELESS_color=Grey

Rock the house inside and out.Take your favorite music, movies, TV shows, or games to the next level with the awardwinning

JBL Control X Wireless speakers. This portable Bluetooth® speaker pair outputsimmersive stereo sound without any wires or cables between each speaker. Thesecompact speakers were designed to provide mind-blowing power and performance toany room in your home. And when it’s time to take the party outside, the rugged designis well-equipped to handle any gathering or event. If you require a wider soundstage,simply add an additional pair of Control X Wireless speakers (sold separately)

for simultaneous playback on up to 4 speakers.Battery-powered stereo Bluetooth® speakers without the wiresStream via Bluetooth® or use the rear 3.5mm input for stereo or mono playback. Unlike otherstereo speakers, there’s no need for an interconnect cable or wire between each speaker.Use one or both speakers inside or outside your home, without the restrictions of a transmitter or wiredcable connection.30W Class-D digital amplifi cation Be the life of the party with 30 watts of uninhibited power from each speaker. While other powered speakers distort at high levels, JBL Control X Wireless speakers provide clean, undistorted audio at any volume. Make a statement by being heard loud and clear. High Defi nition Imaging (HDI) waveguide with 1″ (25mm) CMMD® Lite tweeter Hear the truth. This proprietary waveguide technology provides the same lifelike stereo imaging and detail found in the world’s most renowned studios, clubs, concert halls, theaters, arenas, and stadiums. Simply put, JBL Control X Wireless speakers were engineered to put the performance

right in front of you. 5.25″ (133mm) polypropylene graphite-fi lled cone woofer We are all about the bass. JBL has a rich history in transducer and acoustic design and it shows with Control X Wireless. We intentionally use a stiff cone material that works in conjunction with our rear patented Slipstream-tuned port. This results in tight, block-rocking beats no matter the

genre.Rugged, contemporary design for indoors or on-the-go JBL Control X Wireless speakers were built to bring out the best in your music no matter the space. These speakers will rock your home, dorm, or commercial space, along with any street, park, campsite, beach, or social event. The rear port also serves as a carrying handle.Ability to add an additional pair of speakers Allows up to 4 Control X Wireless speakers to work together to provide expanded, super-sized stereo or summed mono coverage to a wide area without the need for additional wires between each speaker (additional pair sold separately). Stereo or summed mono modes with channel assignment Depending on the location and use, you have the flexibility to assign each speaker as Left, Right, or Left+Right (summed mono). For a wider soundstage, simply switch both speakers into summed mono mode. You can also use the primary speaker by itself in summed mono mode for convenience and portability. Boundary compensation switch Hit the switch and the JBL Control X Wireless speakers instantly adjust the EQ based on whether the speakers are wall-mounted or placed on a fl at surface (mounting hardware sold separately). Top Surface Volume and Playback ControlA rubberized interface on top of the primary speaker allows quick and easy access to playback and volume controls. You can manually pause, play, or skip tracks back and forward without an app or remote.

Features

  • Battery-powered stereo Bluetooth®
  • speakers without the wires
  • 30W Class-D digital amplifi cation
  • High Defi nition Imaging (HDI) waveguide
  • with 1″ (25mm) CMMD® Lite tweeter
  • 5.25″ (133mm) polypropylene graphitefi
  • lled cone woofer
  • Rugged, contemporary design for indoors
  • or on-the-go
  • Ability to add an additional pair of speakers
  • Stereo or summed mono modes with
  • channel assignment
  • Boundary compensation switch
  • Top Surface Volume and Playback Control
Specification
Frequency Range (-10 dB) 45 Hz to 20 kHz
Frequency Response (+/-3 dB) 62Hz – 16 kHz
Power Rating 240 W Continuous Program (2 hrs)
120 W (480W peak), Continuous Pink Noise (2 hrs)
90 W (360W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage 27.5 V RMS (2 hrs), 55.0 V peak
Maximum SPL 112 dB ave. Continuous Pink Noise (118 dB peak)
Sensitivity 91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Coverage Angle 100° x 100°
Directivity Factor (Q) 7.3 (averaged 1kHz – 16kHz)
Directivity Index (DI) 8.3dB (averaged 1kHz – 16kHz)
Nominal Impedance 8 ohms (THRU setting)
Crossover Type 2nd order low-pass, 1st order high-pass, plus conjugate shaping
Transformer Taps 70V: 60W, 30W, 15W, 7.5W
100V: 60W, 30W, 15W
Insertion Loss: <0.94 dB at any tap setting
Thru Setting: 8Ω nominal
Recommended Protective 45 Hz high-pass (24 dB/oct) for 8Ω operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
High-Pass
Low Frequency Driver 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
High Frequency Driver 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure Material High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Environmental IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Termination Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Agency Rating ROHS-compliant; Transformer UL Recognized per UL1876
Colors Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D) 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight 6.8 kg (15.0 lbs)
Shipping Weight 15.4 kg (34 lbs) pair-packed (for 2 speakers)
Included Accessories InvisiBall™ wall-mounting system), 6 mm x 180 mm hex key
Optional Accessories MTC-28UB-1 – Yolk-type U-bracket (&-WH)
MTC-28WMG-1 – WeatherMax grille with backing (&-WH)
MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)