NPE MT-Series DStereo Mixer

NPE MT-Series DStereo Mixer AUDIO  SYSTEMS

Specification

MT-601D, MT-402D, MT-403D

Frequency Response: MIC / LINE input Min Gain 10 Hz-20 kHz 0, -0.5dB
to any audio output (EQ flat test position) Max Gain 40 Hz-20 kHz 0, -0.5dB
Frequency Response: Stereo input Min Gain 5 Hz-20 kHz 0, -0.5dB
to any audio output (EQ flat test position) Max Gain 20 Hz-20 kHz 0, -0.5dB
Distortion (THD): frequency 1kHz @ +20dBu Any input to audio output Better than 0.03%
Equalizer +/- 12dB (MIC / LINE input) : Shelving LF 100Hz, HF 5kHz
Equalizer +/- 12dB (Stereo input) : Shelving LF 100Hz, HF 10kHz
Noise Measured 20Hz-20kHz : MIC / Line input Ref 150 W <-123dBu
Equivalence input noise (EIN): Stereo input Ref 150 W <-90dBu
Common Mode Rejection Ratio : MIC / Line input >50dB
Stereo input >50dB
Hum & Noise 20Hz-20kHz (Echo Off) : Any Max Gain & Boost <-30dBu
GAIN ref PGM, Monitor and Headphone : Microphone input 31dB to 74dB
Output @ no load : Line input -3dB to 40dB
Return input 17dB
Difference PGM Output : SEND & REC output -14dB
Maximum Input Level (min gain) : Microphone input 3dBu
Line input 40dBu
Stereo input 28dBu
Input Impedance: Microphone input >2kW active balanced
Line input >10kW active balanced
Return input >10kW unbalanced
Output Impedance: Any audio output >100W
Echo Delay Time Control: 200-450mS
Dimensions Width x Height x Depth: Exclude knobs & connector 330x264x60mm
Weigh: Exclude Pack 3.1kg / 6.82lbs
Power Requirement / Consumption: 220Vac 50Hz 10va