QSC Speaker AD-S112-sw

QSC Speaker AD-S112-sw AUDIO SYSTEMS

QSC AD-S112-sw Subwoofer, 12″, 8Ω, Surface Mount, Weather Resistant, Foreground/Background Loudpeaker, includes mounting yoke. Available in black. 

Feature.

  • 12” weather treated woofer
  • TFR™ (Turbulent Flow Reduction) port provides optimal resonant tuning and high velocity air flow
  • Maximum peak SPL 121 dB
  • Included yoke mount maximizes boundary plane coupling while reducing vibration transmission
  • Optional M10 Kit-C for additional installation versatility
  • Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
  • Lightweight ABS enclosures offer long-term durability and lasting good looks
  • Sealed input panel cover and powder coated aluminum grilles for added weather resistance
  • Meets IEC60529 IP-54 for dust and splash resistance
  • Available in black (RAL 9011)
  • Complete EASE, CF2, CAD, and BIM information available online
Specification
System Details AD-S12 AD-S112sw
Effective frequency range1 52 Hz to 20 kHz 30 to 135 Hz
Rated noise power / voltage2 300 watts / 50 volts (rms) 300 watts / 50 volts (rms)
Broad-band sensitivity3 95 dB SPL 90 dB SPL
Coverage angle (-6 dB) 75°
Directivity factor (Q) 12
Directivity Index 11 dB
Maximum continuous SPL4 120 dB 115 dB
Maximum peak SPL4 126 dB 121 dB
Rated impedance 8 ohms 8 ohms
Recommended amplifier power (loudspeaker “program” power) 600 watts 600 watts
Transformer taps  n/a
 n/a
HF transducer 1” exit / 1.4” voice coil compression driver
LF transducer 12” weather resistant paper cone woofer, 3” / 76 mm voice coil 12” weather resistant paper cone woofer,
2.5” / 64mm voice coil
Input connector type Euroblock connector with parallel output terminals Euroblock connector with parallel output
Enclosure material Painted ABS polymer Painted ABS polymer
Grille material Powder coated aluminum Powder coated aluminum
Yoke material Powder coated galvanized steel
Enclosure Details
Ingress protection IP-54 IP-54
Operating environment Designed for indoor and outdoor use Designed for indoor and outdoor use
Testing The AD Series loudspeakers qualified for outdoor use using the following tests: The AD Series loudspeakers qualified for outdoor use using the following tests:
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
High and low temperature:  tested according to QSC internal standards between -20° and 50° C High and low temperature: tested according to QSC internal standards between -20° and 50° C
Operating Temperature Range -20 to 50° C  / -4 to 122° F -20 to 50° C / -4 to 122° F
Net weight 35.2 lb / 16 kg 29 lb / 13.2 kg
Product dimensions 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm) 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm)
Shipping weight 46.3 lb / 21 kg 43.1 lb / 19.6 kg
Shipping dimensions 34.5” x 17.9” x 17.2” (765 x 455 x 437 mm) 27.5” x 21.75” x 18.5” (698 x 552 x 470 mm)
Included accessories X-Mount mounting system, euroblock connector, Input panel cover Yoke mounting system, euroblock connector,
input panel cover
Optional accessories YMS12 yoke mount, M10 Kit-C
1 Free-field, -10 dB from on-axis sensitivity 1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 hours 2 IEC60268-1 noise signal for 2 hours
3 On-Axis, free-field sensitivity, 2.83V, 1 m 3 On-Axis, free-field sensitivity, 2.83V, 1 m
4 Calculated from rated noise voltage and sensitivity 4 Calculated from rated noise voltage and sensitivity