TOA D5000 Digital Wireless System

WM-D5200 Digital Wireless Microphone

WM-D5200

The WM-D5200 Digital wireless microphone employs an electret condenser microphone capsule and is suitable for any applications. This wireless microphone employs a digital transmission system that is effectively immune to interference. Further, not only does TOA’s unique information concealment technology (Encryption Setting function) ensure high confidentiality and security against eavesdropping, but their code setting and transmission output selection functions ensure that this microphone is also compatible with a wide range of operating conditions, such as use of the same transmission channel between adjacent areas.  

*1 Cannot be used in the U.S.A and Canada.

Microphone ElementElectret condenser unit: Unidirectional
Modulation typeFSK
Frequency RangeC4/C7 ver.: 794 – 832 MHz, G1 ver.: 606 – 636 MHz
Channel Selectable160 channels (The number of channels may differ from country to country.)
RF Carrier PowerLess than 50 mW
Maximum Input Level132 dB SPL (Sensitivity: L)/122 dB SPL (Sensitivity: H)
Audio Frequency Response100 Hz – 12 kHz
AntennaBuilt-in type
Dynamic RangeTyp. 90 dB (when used with WT-D5800)
ID Selectable10 patterns
BatteryWB-2000 rechargeable battery (option) or AA Alkaline dry cell battery
Battery LifeApprox. 8 hours
Operating Temperature-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) (except battery)
Operating Humidity30 % to 85 %RH (no condensation)
FinishBody: ABS resin, black, coating
Head: Steel, black, paint
Dimensionsφ47 × 239.5 mm (φ1.85 × 9.43 in)
Weight220 g (0.49 lb) (with battery)
AccessoryStorage case …1, Screw driver (for setting) …1, Microphone holder …1
OptionBattery charger: BC-2000 (*1)
Ni-MH Battery: WB-2000-2 (*1) (containing 2 pieces)

WM-D5300 Digital Wireless Transmitter

 

WM-D5300

The WM-D5300 Digital wireless transmitter has been manufactured for use with a UHF system. It is for use in speech reinforcement applications. This wireless transmitter employs a digital transmission system that is effectively immune to interference. Further, not only does TOA’s unique information concealment technology (Encryption Setting function) ensure high confidentiality and security against eavesdropping, but their code setting and transmission output selection functions ensure that this transmitter is also compatible with a wide range of operating conditions, such as use of the same transmission channel between adjacent areas.  

*1 0 dB = 1V
*2 Cannot be used in the U.S.A and Canada.

Frequency RangeC4/C7 ver.: 794 – 832 MHz, G1 ver.: 606 – 636 MHz
Modulation typeFSK
Channel Selectable160 channels (The number of channels may differ from country to country.)
RF Carrier PowerLess than 50 mW
Maximum Input Level-18 dB (*1) (Sensitivity: L)/-28 dB (*1) (Sensitivity: H)
Audio Frequency Response100 Hz – 12 kHz
AntennaLamda/4 whip antenna
ID Selectable10 patterns
BatteryWB-2000 rechargeable battery (option) or AA Alkaline dry cell battery
Battery LifeApprox. 8 hours
Operating Temperature-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) (except battery)
Operating Humidity30 % to 85 %RH (no condensation)
FinishBody: ABS resin, black, paint
DimensionsC4/C7 ver.: 62 (W) x 171 (H) x 19 (D) mm (2.44 in x 6.73 in x 0.75 in)
G1 ver/: 62 (W) x 185 (H) x 19 (D) mm (2.44 in x 7.28 in x 0.75 in)
Weight90 g (0.2 lb) (with battery)
AccessoryStorage case …1, Screw driver (for setting) …1
OptionBattery charger: BC-2000 (*2)
Ni-MH Battery: WB-2000-2 (*2) (containing 2 pieces)
Unidirectional lavalier microphone: YP-M5300, 
Omnidirectional lavalier microphone: YP-M5310, 
Headset microphone: WH-4000A, WH-4000H

WT-D5800 Digital Wireless Receiver

WT-D5800

The WT-D5800 is a PLL-synthesizer controlled double super-heterodyne diversity receiver designed to be used with a UHF wireless system. Employing a digital reception system that is virtually immune to interference and noise, the WT-D5800 Wireless Receiver ensures stable radio signal reception. Additionally, this receiver features a host of convenient functions, such as external equipment control by way of contact outputs, and system status monitoring by way of its maintenance software, enabling highly reliable operation.  

Power SourceAC mains (supplied AC adapter must be used)
Current Consumption350 mA (13.5 V)
Frequency RangeC4/C7 ver.: 794 – 832 MHz, G1 ver.: 606 – 636 MHz
Channel Selectable160 selectable frequencies
Receiving SystemDouble super-heterodyne
Diversity systemSpace diversity (digital diversity)
Mixing OutputMIC/LINE (selectable): -60 dB (*1) (MIC)/-20 dB (*1) (LINE), 600 Ω phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced)
Mixing Input-20 dB (*1), 10 kΩ, unbalanced, phone jack
Antenna Input75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output75 Ω, BNC (Gain 0 dB)
Contact Output1 channel, no-voltage make contact output, withstand voltage: 30 V DC, control current 0.5 A max, terminal block (2pins)
Receiving Sensitivity24 dBμV or less (Bit error rate:1E-5 or less)
Antenna Input Attenuator0 dB/-10 dB switchable
IndicatorAudio (5 steps), RF (5 steps), ANT A/B, Audio (peak), Battery alarm
Frequency Response50 Hz – 12 kHz
Total Harmonic Distortion0.5 % or less
FunctionFrequencies scanning, Feedback suppressor, Equalizer (optimizing each compatible microphone)
ID Selectable10 patterns
Operating Temperature-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity30 % to 85 %RH (no condensation)
FinishResin, black
Dimensions210 (W) x 44 (H) x 211.9 (D) mm (8.27 in x 1.73 in x 8.34 in)
Weight730 g (1.61 lb)
AccessoryAC adapter (*2) …1, Whip antenna …2, Rubber foot …4
OptionRack mounting bracket kit: MB-WT3 (for rack mounting one WT-D5800 unit), MB-WT4 (for rack mounting two WT-D5800 units)

BC-2000 Battery Charger

BC-2000 Y

The BC-2000 is a dedicated battery charger for the WM-D5200 Digital wireless microphone and WM-D5300 Digital wireless transmitter. It works with the optional AD-5000-2 AC adapter. The BC-2000 employs a quick charging system for nickel-metal hydride (Ni-MH) batteries, allowing up to 2 units to be fully charged within 3 hours.  

Power Source12 V DC (Optional AC Adapter AD-5000-2 must be used)
Current Consumption700 mA
Charging TimeMax. 3 hours
Number of Units to be Charged Simultaneously2 pieces
Operating Temperature0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity30 % to 85 %RH (no condensation)
FinishCase: ABS resin, black, semi-gloss, paint
Rechargeable unit receptacle section: PPE resin, black
Dimensions238 (W) × 108.5 (H) × 98 (D) mm (9.37″ × 4.27″ × 3.86″)
Weight550 g (1.21 lb)
OptionNi-MH battery: WB-2000-2 (containing 2 pieces)
AC adapter: AD-5000-2