WD-5800 Antenna Distributor
WD-5800
The TOA Wireless Antenna Distributor WD-5800 is designed to be used in conjunction with VHF/UHF band system. It comes with two distribution channels, in which two input signals are mixed and distributed to four outputs. The WD-5800 also has four DC power distribution outputs.
*1 Not supplied with the WD-5800(-CE). For the usable power supply cord and AC adapter, please contact your nearest TOA dealer.
Power Source | AC mains (supplied AC adapter must be used) |
---|---|
Power Consumption | 25 W or less |
Current Consumption | 1.6 A (12 – 15 V DC) |
Frequency Range | VHF/UHF |
Antenna Input | 2 inputs per distribution channel (front × 1, rear × 1), 75 Ω, BNC (phantom powering for antenna) |
Antenna Output | 4 outputs per distribution channel, 75 Ω, BNC |
DC Power Supply | 4 output (each output: 12 V DC/250 mA) (Output voltage of this unit depends on that of AC adapters.) |
Indicator | Power lamp |
Operating Temperature | -10℃ to +50℃ |
Operating Humidity | 30 % to 85 %RH (no condensation) |
Finish | Panel: Aluminium, black, paint Case: Steel, black, paint |
Dimensions | 420 (W) × 44 (H) × 214 (D) mm |
Weight | 2 kg |
Accessory | AC adapter*1 x 1, Power cord (2m)*1 x 1, DC cable x 4, Rubber foot x 4 |
Option | Rack mounting bracket: MB-15B |
WT-5100 Wireless Portable Receiver
Power Source | 1.5 V DC (Battery) |
---|---|
Receiving Frequencies | 576 – 865 MHz (*1), UHF |
Channel Selectable | 16 selectable frequencies |
Receiving System | Double super-heterodyne |
Receiving Sensitivity | 60 dB or more, Signal to Noise ratio (20 dBμV input, ±40 kHz deviation) |
Frequency Response | 200 Hz – 5 kHz (Portable transmitter to Potable receiver) |
De-emphasis | 50 μs |
Output Level | 4 mW (16 Ω load, 10 % distortion) |
Battery | WB-2000 rechargeable battery (option) or LR6/AA alkaline dry cell battery |
Battery Life | 16 hours (when the WB-2000 rechargeable battery is used) 15 hours (when the alkaline battery is used) |
Operation Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) (except battery) |
Operating Humidity | 30 % to 85 %RH (no condensation) |
Finish | Resin, dark silver |
Dimensions | 62 (W) × 163.6 (H) × 32.5 (D) mm (2.44″ x 6.44″ x 1.28″) |
Weight | 125 g (0.28 lb) (battery included) |
Accessory | Neck strap…1 |
Option | Battery charger: BC-5000-2, BC-5000-6, BC-5000-12 Ni-MH Battery: WB-2000-2 (containing 2 pieces) Ear-suspension earphone: YP-E401, Assist earphone: YP-E5000 |
WM-5325 Wireless Transmitter
WM-5325
The WM-5325 wireless transmitter has been manufactured for use with a UHF system. It is for use in speech reinforcement applications. Thanks to the PLL-synthesizer system, 64 different operating frequencies are made available. A high output power ensures stable radio signal transmission.
Modulation | Frequency modulation |
---|---|
Frequency Range | 576 – 937.5 MHz (*2), UHF |
Channel Selectable | 64 channels (the number of channels may differ from country to country) |
RF Carrier Power | Less than 50 mW (Factory preset 10 mW ERP) |
Tone Frequency | 32.768 kHz |
Oscillator | PLL synthesized |
Maximum Input Level | -14 dB to -29 dB (*1) (Audio level control: Min. to Max.) |
Maximum Deviation | ±40 kHz |
Audio Frequency Response | 100 Hz – 15 kHz |
Battery | WB-2000 rechargeable battery (option) or AA alkaline dry cell battery |
Battery Life | Approx. 13 h (when the WB-2000 rechargeable battery is used) Approx. 10 h (when the alkaline battery is used) |
Indicator | Power/Battery lamps |
Antenna | Built-in type |
Connector | φ3.5 mm (φ0.14″) mini plug |
Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) (except battery) |
Operating Humidity | 30 % to 85 %RH (no condensation) |
Finish | Resin, coating |
Dimensions | 62 (W) × 102.5 (H) × 23 (D) mm (2.44″ × 4.04″ × 0.91″) |
Weight | 90 g (0.2 lb) (with battery) |
Accessory | Screw driver …1, Storage case …1, Neck strap …1 |
Option | Battery charger: BC-5000-2, BC-5000-6, BC-5000-12 Ni-MH Battery: WB-2000-2 (containing 2 pieces) Unidirectional lavalier microphone: YP-M5300 Omnidirectional lavalier microphone: YP-M5310 Headset microphone: WH-4000A, WH-4000H |
WH-4000P Waist Pouch
YW-4500 UHF Wireless Antenna
YW-4500
The wireless antenna YW-4500 has been designed for UHF band wireless system. Cable loss can be compensated for by a built-in RF signal booster. The YW-4500 in a dipole antenna designed to be installed in doors. Use the coaxial cable with 75 Ω impedance.
Power Source | 7 – 12 V DC (supplied from amplifier or tuner) |
---|---|
Current Consumption | 15 mA or less |
Receiving Frequency | 550 – 932 MHz, UHF |
Dipole Ratio Relative Gain | 8 dB or more (780 MHz) |
VSWR | 3.0 or less |
Output Impedance | 75 Ω |
Mounting Hole Pitch | 83.5 mm (dimensions for wiring box) |
Operating Temperature | -10 %%dC to +50 %%dC |
Operating Humidity | 30 % to 85 %RH (no condensation) |
Finish | AES resin, off-white |
Dimensions | 105 (W) × 140 (H) × 126 (D) mm |
Weight | 270 g |
Accessory | M3.5 screw for wiring box…2, Tapping screw (M4) for wooden wall…2, RG-6/U or RG-11/U sleeve…1 |